<< Back

        Stainless steel water separators are widely used in supporting water pipeline projects, supporting direct drinking water projects in new residential areas, and water distribution systems such as industrial and civil buildings, hotels and public buildings, family decoration, heating supply and so on. Stainless steel water separator uses clean and sanitary stainless steel pipe to replace the traditional iron, carbon steel and copper water separator. It can reduce joints, save materials and keep the water source clean and hygienic all the time. The main pipe of stainless steel water separator is from ￠ 30 to ￠ 150 (dn25-dn150), the water inlet interface is G1 / 2-g5 inch (dn15-dn150), and the water outlet is G1 / 2-g5 inch (dn15-dn150). The number of water outlet joints can be customized according to customer requirements. Stainless steel water separator is a water distribution and collection device used to connect the water supply and return of each heating pipe in the water system. Stainless steel water separators used in floor heating and air conditioning systems should be made of brass. Most stainless steel water separators used in household meter transformation of tap water supply system are made of PP or PE.

      In the floor heating system, the stainless steel water separator is mainly responsible for the opening and closing of the water flow in the floor heating loop. When the water in the gas-fired boiler flows into the stainless steel water separator through the main pipe, the impurities are isolated through the filter, and then the water is evenly distributed to the loop. After heat exchange, it returns to the main bar of water collection, and then flows into the heating system through the water return port. The stainless steel water separator is used for shunting. When there are many pipelines, if too many fittings such as tee and cross are used, the energy loss of the system is great, which is convenient for users to operate. When the stainless steel water separator is used, the pipeline direction is clear and easy to operate. It is convenient for maintenance. The interfaces on the stainless steel water separator are flange connected. It can be said that the purpose is to facilitate disassembly and maintenance. Reduce system differential pressure.

       Generally, stainless steel water separator is mainly composed of stainless steel water separator, water collector and fixed support. The function of the stainless steel water separator is to separate the heat source and hot water into the pipes laid by the ground radiant heating of each road, so as to realize the purpose of room heating and temperature regulation. The water collector is to collect the low-temperature water in each road after separate heat dissipation and fix it to the wall or ground.